Ethernet WAN

1 RJ-45 SFP Gigabit combination port

Ethernet LAN

8 RJ-45 Gigabit Ethernet ports

RV260P has 4 PoE ports with a 60W power budget

Console port

1 RJ-45 port

Switch

Power on/off

Cabling type

Category 5 or better

LEDs

Power, VPN, WAN, LAN

Operating system

Linux

LAN

VLANs

16

Port security

Yes, 802.1X

IPv6

Dual stack, 6rd,6in4

WAN

Dynamic Host Configuration Protocol (DHCP) client, static IP, Point-to-Point Protocol over Ethernet (PPPoE), PPTP, Layer 2 Tunneling Protocol (L2TP)

WLAN

3x3 802.11ac Wave 2

Security

Firewall

SPI firewall

Port forwarding and triggering

Denial-of-Service prevention (DoS)

Access control

IP access control lists

Secure management

HTTPS, username/password complexity

User privileges

Two levels of access: Admin and guest

Network

Network protocols

●  Dynamic Host Configuration Protocol (DHCP) server

●  Point-to-Point Protocol over Ethernet (PPPoE)

●  Point-to-Point Tunneling Protocol (PPTP)

◦   Layer 2 Tunneling Protocol (L2TP)

●  DNS proxy

●  DHCP relay agent

●  Internet Group Management Protocol (IGMP) proxy and multicast forwarding

●  Rapid Spanning Tree Protocol (RSTP)

●  Dynamic DNS (DynDNS, No-IP, ChangeIP)

●  Network Address Translation (NAT), Port Address Translation (PAT)

●  One-to-one NAT

●  Port management

●  Port mirroring

●  Software-configurable DMZ to any LAN IP address

◦   Session Initiation Protocol (SIP) Application Layer Gateways (ALG)

Routing protocols

●  Static routing, IGMP proxy

●  Dynamic routing

●  Routing Information Protocol (RIP) v1 and v2

●  RIP for IPv6 (RIPng)

◦   Inter-VLAN routing

NAT protocol

Port Address Translation (PAT), Network Address Port Translation (NAPT)

Port forwarding, One-to-one NAT, VPN NAT Traversal, Session Initiation Protocol (SIP), ALG, FTP ALG

VPN

Gateway-to-gateway IPsec VPN

20 IPsec tunnels

Client-to-gateway IPsec VPN

20 IPsec tunnels

IPsec VPN

Internet Key Exchange (IKE) v2, Generic Routing Encapsulation (GRE), hub and spoke supported

PPTP VPN

20 PPTP VPN tunnels

OpenVPN

Support for the OpenVPN server

Encryption

Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) with 128, 192, and 256-bit keys encryption

VPN pass-through

IPsec, PPTP, and L2TP pass-through

Quality of Service (QoS)

QoS

●  802.1p port-based priority on LAN port, application-based priority on WAN port

●  4 queues


●  Differentiated Services Code Point (DSCP) support


●  Class of Service (CoS)

●  Bandwidth management for service prioritization

Jumbo frame support

Supports jumbo frames on Gigabit ports – at least 1536B

Performance

NAT throughput

800+ Mbps

Concurrent sessions

25,000

IPsec VPN throughput

75+ Mbps

Configuration

Web-based user interface

Browser-based configuration (HTTP/HTTPS)

Management

Web-based user interface, Simple Network Management Protocol (SNMP) v3, Bonjour, PnP

Command-line interface via console – limited configuration command support

FindIT support for monitoring and management

Event logging

Local, syslog, email alerts

Network diagnostics

Ping, traceroute, DNS lookup

Upgradability

Firmware upgradable via browser UI, imported/exported file, USB, Cisco FindIT

System time

Network Time Protocol (NTP), Daylight Savings, manual entry

Language support

User interface support for English

Environmental

Power

RV260: 12VDC/2A

RV260P: 54VDC/1.67A

RV260W: 12VDC/2.5A

Operating temperature

0° to 40°C (32° to 104°F)

Storage temperature

-20° to 70°C (-4° to 158°F)

Operating humidity

10% to 85% noncondensing

Storage humidity

5% to 90% noncondensing

Certifications

Safety:

●  UL 60950-1

●  CAN/CSA-C22.2 No. 60950-1

●  IEC 60950-1

●  EN 60950-1

Radio approvals:

●  FCC Part 15.247, 15.407

●  RSS-210 (Canada)

●  EN 300.328, EN 301.893 (Europe)

●  AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility:

●  FCC Part 15.107 and 15.109

●  ICES-003 (Canada)

●  EN 301.489-1 and -17 (Europe)

◦   RV260/RV260P rackmount: Class A